LD5611A/BRG Series
1000pcs
Notes:
1. All dimensions are in millimeters(inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted.
2. Specifications are subject to change without notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
Table1:
Single Digit 7 Segment dual-color LED Display, Digit Height: 14.20mm(0.56inch), External Dimensions: 12.60x19.00x8.00mm (LxWxHmm) |
| |||||||
Description | Part No. | Chip | Iv(mcd)@20mA | |||||
Cathode Row | Anode Row | Material | Color | W LD (nm) | One Dot | |||
Min. | Typ. | |||||||
Standard Brightness | LD5611ARG | LD5611BRG | GaAlAs | Super Red | 640 | 8 | 10 | |
GaP | Green | 568 | 7 | 9 | ||||
Ultra-High Brightness | LD5611AURUG | LD5611BURUG | AlGaInP | Ultra Red | 640 | 30 | 45 | |
AlGaInP | Ultra Green | 573 | 30 | 45 | ||||
Table2: Parameters for one dot
LD5611BURPGUB | Electrical optical Characteristics[1] | Absolute Maximum Ratings[1] | ||||||
Color | Forward Voltage(V) @ IF=20mA | Reverse Current VR=5V (uA) |
Power Dissipation (mW) |
DC Forward Current (mA) | Peak Forward Current[2] (mA) |
Reverse Voltage (V) | ||
Typ. | Max. | |||||||
Super Red | 1.8 | 2.2 | 30 | 60 | 25 | 100 | 5 | |
Green | 2.2 | 2.5 | 30 | 80 | 30 | 100 | 5 | |
Ultra Red | 1.9 | 2.6 | 30 | 60 | 30 | 100 |
| |
Ultra Green | 2.1 | 2.6 | 300 | 75 | 30 | 100 | 5 | |
Operating/ Storage Temp.: -40 to +80 deg.; Lead Solder Temp.: 260 deg. for 3-5 Sec. 2mm below package base |
| |||||||
Notes:
1. At Ta=25 deg.
2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse
Notes:
1. All dimensions are in millimeters(inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted.
2. Specifications are subject to change without notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
Table1:
Single Digit 7 Segment dual-color LED Display, Digit Height: 14.20mm(0.56inch), External Dimensions: 12.60x19.00x8.00mm (LxWxHmm) |
| |||||||
Description | Part No. | Chip | Iv(mcd)@20mA | |||||
Cathode Row | Anode Row | Material | Color | W LD (nm) | One Dot | |||
Min. | Typ. | |||||||
Standard Brightness | LD5611ARG | LD5611BRG | GaAlAs | Super Red | 640 | 8 | 10 | |
GaP | Green | 568 | 7 | 9 | ||||
Ultra-High Brightness | LD5611AURUG | LD5611BURUG | AlGaInP | Ultra Red | 640 | 30 | 45 | |
AlGaInP | Ultra Green | 573 | 30 | 45 | ||||
Table2: Parameters for one dot
LD5611BURPGUB | Electrical optical Characteristics[1] | Absolute Maximum Ratings[1] | ||||||
Color | Forward Voltage(V) @ IF=20mA | Reverse Current VR=5V (uA) |
Power Dissipation (mW) |
DC Forward Current (mA) | Peak Forward Current[2] (mA) |
Reverse Voltage (V) | ||
Typ. | Max. | |||||||
Super Red | 1.8 | 2.2 | 30 | 60 | 25 | 100 | 5 | |
Green | 2.2 | 2.5 | 30 | 80 | 30 | 100 | 5 | |
Ultra Red | 1.9 | 2.6 | 30 | 60 | 30 | 100 |
| |
Ultra Green | 2.1 | 2.6 | 300 | 75 | 30 | 100 | 5 | |
Operating/ Storage Temp.: -40 to +80 deg.; Lead Solder Temp.: 260 deg. for 3-5 Sec. 2mm below package base |
| |||||||
Notes:
1. At Ta=25 deg.
2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse