LLS3535RGB-HJAEC
LITEKEY
8541401000
RGB Top-type SMD RGB LED 3535
Part No: LLS3535RGB-HJAEC
115-degree, 3.5(L)×3.5(W)-mm, PLCC4 TOP
SMD LED in full color with white-diffused lens (epoxy) and black surface
Emitting color: RGB, full colors
Applications
Outdoor display screen
Indicator
Decoration
Back-light
Others
Mechanical Dimensions
Absolute Maximum Ratings
Items | Symbol | Absolute Maximum Rating | Unit | ||
R | G | B | |||
Forward Current (TA=25℃) | IF | 30 | 25 | 25 | mA |
Peak Forward Current Note (TA=25℃) | IFP | 120 | 100 | 100 | mA |
Reverse Voltage (TA=25℃) | VR | 10 | V | ||
Power Dissipation (TA=25℃) | PD | 72 | 95 | 95 | mW |
Operation Temperature | Topr | -30~+85 | ℃ | ||
Storage Temperature | Tstg | -40~+85 | ℃ |
Note: Pulse width ≤0.1 msec, duty cycle ≤1/10.
Typical Electrical & Optical Characteristics (TA=25℃)
Characteristics | Condition | Symbol | Values | Unit | ||
R | G | B | ||||
Dominant Wavelength | IF(R)=20mA IF(G)=20mA IF(B)=20mA | λD(typ) | 622 | 526 | 470 | nm |
Viewing Angle at 50% IV | 2θ1/2(typ) | 115 | deg | |||
Forward Voltage | VF(typ) | 2.0 | 3.2 | 3.0 | V | |
Luminous Intensity | IV(typ) | 680 | 1600 | 400 | mcd | |
Reverse Current (Max.) | VR=5V | IR | 10 | uA |
Notes:
1. Production characteristics were decided by Jiuzhou optoelectronic, the optical and electrical performance may be different for each rank, customers need to choose method of application according to their condition.
2. We are dedicated to improve the performance of our LEDs, and will not inform the customers if any specification is changed.
SMT Reflow Soldering Instructions
Reflow soldering process shall be less than twice and cooling process to normal temperature is required between the first and second soldering process.
Hand Soldering
A soldering iron of less than 20W is recommended to be used in Hand Soldering. Please keep the temperature of the soldering iron under 350℃ while soldering. The LED can be soldered one time only and the soldering time must be less than 3 seconds. Be careful because the damage of the product may happen in hand soldering process.
Recommended Soldering Pad Design Units: mm
RGB Top-type SMD RGB LED 3535
Part No: LLS3535RGB-HJAEC
115-degree, 3.5(L)×3.5(W)-mm, PLCC4 TOP
SMD LED in full color with white-diffused lens (epoxy) and black surface
Emitting color: RGB, full colors
Applications
Outdoor display screen
Indicator
Decoration
Back-light
Others
Mechanical Dimensions
Absolute Maximum Ratings
Items | Symbol | Absolute Maximum Rating | Unit | ||
R | G | B | |||
Forward Current (TA=25℃) | IF | 30 | 25 | 25 | mA |
Peak Forward Current Note (TA=25℃) | IFP | 120 | 100 | 100 | mA |
Reverse Voltage (TA=25℃) | VR | 10 | V | ||
Power Dissipation (TA=25℃) | PD | 72 | 95 | 95 | mW |
Operation Temperature | Topr | -30~+85 | ℃ | ||
Storage Temperature | Tstg | -40~+85 | ℃ |
Note: Pulse width ≤0.1 msec, duty cycle ≤1/10.
Typical Electrical & Optical Characteristics (TA=25℃)
Characteristics | Condition | Symbol | Values | Unit | ||
R | G | B | ||||
Dominant Wavelength | IF(R)=20mA IF(G)=20mA IF(B)=20mA | λD(typ) | 622 | 526 | 470 | nm |
Viewing Angle at 50% IV | 2θ1/2(typ) | 115 | deg | |||
Forward Voltage | VF(typ) | 2.0 | 3.2 | 3.0 | V | |
Luminous Intensity | IV(typ) | 680 | 1600 | 400 | mcd | |
Reverse Current (Max.) | VR=5V | IR | 10 | uA |
Notes:
1. Production characteristics were decided by Jiuzhou optoelectronic, the optical and electrical performance may be different for each rank, customers need to choose method of application according to their condition.
2. We are dedicated to improve the performance of our LEDs, and will not inform the customers if any specification is changed.
SMT Reflow Soldering Instructions
Reflow soldering process shall be less than twice and cooling process to normal temperature is required between the first and second soldering process.
Hand Soldering
A soldering iron of less than 20W is recommended to be used in Hand Soldering. Please keep the temperature of the soldering iron under 350℃ while soldering. The LED can be soldered one time only and the soldering time must be less than 3 seconds. Be careful because the damage of the product may happen in hand soldering process.
Recommended Soldering Pad Design Units: mm