0805 Yellow-green SMD LED

0805 Yellow-green Surface Mount LEDs (LLS0805UG1)

Package Dimensions of Yellow-green chip LED 0805                     

NOTES：

1.All dimensions are in millimeter[unit];

2.Tolerance is±0.1mm(0.004”) unless other specified;

3.Specifications are subject to change without notice.

·Features

2.0*1.25*0.80mm

Mono-color type

Soldering methods :All SMT assembly methods

Comply ROHS standard

Mono-color type.

Soldering methods :All SMT assembly methods.

Comply ROHS standard.

Extremely small size (2x1.25x0.8mm).

Operating temperature range from -40°C to +85°C.

0805 industry standard footprint.

Very Suitable for application in small Devices.

High-reliability performance.

Wide viewing angle.

Flat top emitting surface.

·Description

This Yellow-green SMD LEDs 0805 are made with AlGaInP on sapphire

Light Emitting Diode.

Application of 0805 Yellow-green chip LED

Optical indicator

Indicator and backlighting in telephone and fax

Flat backlight for LCD,switch and symbol

Light pipe application

General use

Part No.	Emitted  Color	Len’s Color	Chip Material
LLS0805UG1(0.80)	Yellow Green	Water   Clear	AlGaInP

Absolute Maximum Ratings(Ta=25℃)

Item	Symbol	Maximum	Unit
Power Dissipation	PD	75	mW
Continuous Forward Current	IFmax	30	mA
Peak Forward Current(1/10   Duty Cycle 0.1ms Pulse Width)	IFP	80	mA
Reverse Voltage	VR	5	V
Operating TemperatureRange	Topr	-40 to+85	℃
Storage TemperatureRange	Tstg	-40 to+85	℃
Lead Solder Temperature	Tsol	260ºC for 3 seconds

Electrical/Optical Characteristics(Ta=25℃)

Item	Symbol	Condition	Min.	Typ.	Max	Unit
Forward Voltage	VF	IF=20mA	---	1.9	2.2	V
Luminous Intensity	IV	IF=20mA	25	50	---	mcd
Wavelength	ld	IF=20mA	--	572	575	nm
Viewing Angle	2θ1/2	IF=20mA	--	120	--	Deg
Reverse Current	IR	VR   =5V	--	--	10	uA

·

Reliability Test Items and Conditions of 0805 Yellow-green ChipLED

NO.	Item	Test Condition	Test Hr/cycle/time	Sample Q’ty	Ac/Re
1	Reflow	TEMP:260±5℃; Min.5Sec	6 min	22pcs	0/1
2	Temperature Cycle	H:+100℃ 15mins To(5mins) L:-40℃ 15mins	20 cycles	22pcs	0/1
3	Thermal Shock	H:+100℃ 15mins To(5mins) L:-40℃ 15mins	100 cycles	22pcs	0/1
4	High Temperature Storage	TEMP: 85℃	1000hrs	22pcs	0/1
5	Low Temperature Storage	TEMP:-40℃	1000hrs	22pcs	0/1
6	DC Operating Life	IF=20MA	1000hrs	22pcs	0/1
7	High Humidity	85%R.H.	1000hrs	22pcs	0/1

SMT Reflow Soldering Instructions of SMD LED 0805

Notes:

1. We recommend the reflow temperature 245±5℃.The maximum soldering temperature should be limited to 260℃ for 10s (max).

2. Don’t cause stress to the epoxy resin while it is exposed to high temperature.

3. Number of reflow process shall be 2 times or less.

The production of chip LED 0805: