English  |
| Quantity: | |
|---|---|
Features
Lighting color:White
1,000pcs/reel, ROHS compliant
LST5050WY - 5050 PLCC6 Top SMD LED in white
Selection Guide
| Part No. | Dice | Lens Type | Luminous intensity(mcd)@20mA*3 | Luminous flux(lm)@20mA*3 | Viewing Angle | ||
| Min. | Max. | Min | Typ | 2θ1/2 | |||
| LTL-5050WY | WHITE (InGaN) | Yellow Diffused | 5900 | 6600 | 18 | 20 | 120° |
| 6600 | 7600 | ||||||
| 7600 | 8500 | ||||||
Note:
1. q1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. The above luminous intensity measurement allowance tolerance ±10%.
Electrical / Optical Characteristics at Ta=25℃
| Parameter | Symbol | Min. | Typ. | Max. | Units | Test Conditions |
| Forward Voltage | VF | 2.8 | --- | 3.4 | V | IF=20mA*3 |
| Reverse Current | IR | --- | --- | 10 | μA | VR = 5V |
| Color Coordinates | X | --- | 0.31 | --- | --- | IF=20mA*3 |
| Y | --- | 0.32 | --- | --- | IF=20mA*3 | |
| Color Temperature | Tc | --- | 6500 | --- | K | IF=20mA*3 |
| Color Rendering Index | CR | 70 | --- | --- | Ra | IF=20mA*3 |
Absolute Maximum Ratings at Ta=25℃
| Parameter | Symbol | Rating | Units |
| Power Dissipation | Pd | 315 | mW |
| DC Forward Current per chip | IF | 30 | mA |
| Peak Forward Current [1] | IFP | 300 | mA |
| Reverse Voltage | VR | 5 | V |
| Electrostatic Discharge(HBM) | ESD | 1000 | V |
| Operating Temperature | Topr | -40 ~ +85 | ℃ |
| Storage Temperature | Tstg | -40 ~ +100 | ℃ |
Note:
1.1/10 Duty Cycle, 0.1ms Pulse Width.
2.The above forward voltage measurement allowance tolerance ±0.1V
3.The above color coordinates measurement allowance tolerance ±0.003
Features
Lighting color:White
1,000pcs/reel, ROHS compliant
LST5050WY - 5050 PLCC6 Top SMD LED in white
Selection Guide
| Part No. | Dice | Lens Type | Luminous intensity(mcd)@20mA*3 | Luminous flux(lm)@20mA*3 | Viewing Angle | ||
| Min. | Max. | Min | Typ | 2θ1/2 | |||
| LTL-5050WY | WHITE (InGaN) | Yellow Diffused | 5900 | 6600 | 18 | 20 | 120° |
| 6600 | 7600 | ||||||
| 7600 | 8500 | ||||||
Note:
1. q1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. The above luminous intensity measurement allowance tolerance ±10%.
Electrical / Optical Characteristics at Ta=25℃
| Parameter | Symbol | Min. | Typ. | Max. | Units | Test Conditions |
| Forward Voltage | VF | 2.8 | --- | 3.4 | V | IF=20mA*3 |
| Reverse Current | IR | --- | --- | 10 | μA | VR = 5V |
| Color Coordinates | X | --- | 0.31 | --- | --- | IF=20mA*3 |
| Y | --- | 0.32 | --- | --- | IF=20mA*3 | |
| Color Temperature | Tc | --- | 6500 | --- | K | IF=20mA*3 |
| Color Rendering Index | CR | 70 | --- | --- | Ra | IF=20mA*3 |
Absolute Maximum Ratings at Ta=25℃
| Parameter | Symbol | Rating | Units |
| Power Dissipation | Pd | 315 | mW |
| DC Forward Current per chip | IF | 30 | mA |
| Peak Forward Current [1] | IFP | 300 | mA |
| Reverse Voltage | VR | 5 | V |
| Electrostatic Discharge(HBM) | ESD | 1000 | V |
| Operating Temperature | Topr | -40 ~ +85 | ℃ |
| Storage Temperature | Tstg | -40 ~ +100 | ℃ |
Note:
1.1/10 Duty Cycle, 0.1ms Pulse Width.
2.The above forward voltage measurement allowance tolerance ±0.1V
3.The above color coordinates measurement allowance tolerance ±0.003
