 |
loading
LD12011A/BRG Series
1000pcs
Notes:
1. All dimensions are in millimeters(inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted.
2. Specifications are subject to change without notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
Table1:
| Single Digit 7 Segment LED Display, Digit Height: 30.60mm(1.20inch), External Dimensions: 28.80x40.80x9.00mm (LxWxHmm) | |||||||
| Description | Part No. | Chip | Iv(mcd)@20mA | ||||
| Cathode Row | Anode Row | Material | Color | W LD (nm) | One Seg(DP) | ||
| Min. | Typ. | ||||||
| Standard Brightness | LD12011ARG | LD12011BRG | GaAlAs | Super Red | 640 | 12(8) | 15(10) |
| GaP | Green | 568 | 10.5(7) | 13.5(9) | |||
| Ultra-High Brightness | LD12011AURUG | LD12011BURUG | AlGaInP | Ultra Red | 640 | 45(30) | 67.5(45) |
| AlGaInP | Ultra Green | 573 | 45(30) | 67.5(45) | |||
Table2： Parameters for one dot
| LD12011BURPGUB | Electrical optical Characteristics[1] | Absolute Maximum Ratings[1] | ||||
| Color | Forward Voltage(V) @ IF=20mA | Reverse Current VR=5V (uA) |
Power Dissipation (mW) |
DC Forward Current (mA) | Peak Forward Current[2] (mA) | |
| One Seg (DP) | Typ. | Max. | ||||
| Super Red | 3.6(1.8) | 4.4(2.2) | 50(30) | 120(60) | 25 | 100 |
| Green | 4.4(2.2) | 5.0(2.5) | 50(30) | 160(80) | 30 | 100 |
| Ultra Red | 3.8(1.9) | 5.2(2.6) | 50(30) | 120(60) | 30 | 100 |
| Ultra Green | 4.2(2.1) | 5.2(2.6) | 50(30) | 150(75) | 30 | 100 |
| Operating/ Storage Temp.: -40 to +80 deg.; Lead Solder Temp.: 260 deg. for 3-5 Sec. 2mm below package base | ||||||
Notes:
1. At Ta=25 deg.
2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse
Notes:
1. All dimensions are in millimeters(inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted.
2. Specifications are subject to change without notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
Table1:
| Single Digit 7 Segment LED Display, Digit Height: 30.60mm(1.20inch), External Dimensions: 28.80x40.80x9.00mm (LxWxHmm) | |||||||
| Description | Part No. | Chip | Iv(mcd)@20mA | ||||
| Cathode Row | Anode Row | Material | Color | W LD (nm) | One Seg(DP) | ||
| Min. | Typ. | ||||||
| Standard Brightness | LD12011ARG | LD12011BRG | GaAlAs | Super Red | 640 | 12(8) | 15(10) |
| GaP | Green | 568 | 10.5(7) | 13.5(9) | |||
| Ultra-High Brightness | LD12011AURUG | LD12011BURUG | AlGaInP | Ultra Red | 640 | 45(30) | 67.5(45) |
| AlGaInP | Ultra Green | 573 | 45(30) | 67.5(45) | |||
Table2： Parameters for one dot
| LD12011BURPGUB | Electrical optical Characteristics[1] | Absolute Maximum Ratings[1] | ||||
| Color | Forward Voltage(V) @ IF=20mA | Reverse Current VR=5V (uA) |
Power Dissipation (mW) |
DC Forward Current (mA) | Peak Forward Current[2] (mA) | |
| One Seg (DP) | Typ. | Max. | ||||
| Super Red | 3.6(1.8) | 4.4(2.2) | 50(30) | 120(60) | 25 | 100 |
| Green | 4.4(2.2) | 5.0(2.5) | 50(30) | 160(80) | 30 | 100 |
| Ultra Red | 3.8(1.9) | 5.2(2.6) | 50(30) | 120(60) | 30 | 100 |
| Ultra Green | 4.2(2.1) | 5.2(2.6) | 50(30) | 150(75) | 30 | 100 |
| Operating/ Storage Temp.: -40 to +80 deg.; Lead Solder Temp.: 260 deg. for 3-5 Sec. 2mm below package base | ||||||
Notes:
1. At Ta=25 deg.
2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse
English
