Package Dimensions and Internal Circuit：
Notes:
1. All dimensions are in millimeters(inches), Tolerance is + 0.25mm(0.01inch)unless other wise noted.
2. Specifications are subject to change without notice.
3. The gap between the reflector and PCB shall not exceed 0.25mm.
Table1:
| Single Digit 7 Segment LED Display, Digit Height: 25.40mm(1.00inch), External Dimensions: 24.00x34.00x10.50mm (LxWxHmm) |
| Part No. |
Chip |
IV@IF=20mA |
IV@IF=20mA |
| Common Cathode |
Common Anode |
Material |
Color |
WLD |
One Seg |
One DP |
| Min. |
Typ. |
Min. |
Typ. |
| LD10016ERG |
LD10016FRG |
GaAlAs |
Super Red |
640 |
12 |
15 |
8 |
10 |
| GaP |
Green |
568 |
10.5 |
13.5 |
7 |
9 |
| LD10016EURUG |
LD10016FURUG |
AlGaInP |
Ultra Red |
640 |
45 |
67.5 |
30 |
45 |
| AlGaInP |
Ultra Green |
573 |
45 |
67.5 |
30 |
45 |
| Unit: |
\ |
\ |
\ |
nm |
mcd |
mcd |
mcd |
mcd |
Table2：
| Color |
Electrical optical Characteristics[1] |
Absolute Maximum Ratings[1] |
| Forward Voltage@ IF=20mA |
Reverse
Current
VR=5V |
Power Dissipation |
DC Forward Current |
Peak Forward Current[2] |
| Typ. |
Max. |
| Super Red |
Per Seg. |
3.6 |
4.4 |
50 |
60 |
25 |
100 |
| Per DP |
1.8 |
2.2 |
30 |
60 |
25 |
100 |
| Green |
Per Seg. |
4.4 |
5 |
50 |
80 |
30 |
100 |
| Per DP |
2.2 |
2.5 |
30 |
80 |
30 |
100 |
| Ultra Red |
Per Seg. |
3.8 |
5.2 |
50 |
60 |
30 |
100 |
| Per DP |
1.9 |
2.6 |
30 |
60 |
30 |
100 |
| Ultra Green |
Per Seg. |
4.2 |
5.2 |
50 |
75 |
30 |
100 |
| Per DP |
2.1 |
2.6 |
30 |
75 |
30 |
100 |
| Unit: |
\ |
V |
V |
uA |
mW |
mA |
mA |
Notes:
1. At Ta=25 deg.
2. Peak forward current at 1/10 Duty Cycle, 0.1ms Pulse
